Reversing Camera
Reversing Camera
The reversing camera is located above the rear license plate.
When the gear is switched to the "R" (reverse) position, the centre display will automatically show the image behind the vehicle.
The system helps driver observe the rear scene on the screen to avoid vehicle damage, but it has blind spots, such as not detecting small objects under the bumper or objects close to the rear and side corners of the bumper.
If dirt, rain or snow sticks to the rearview camera, the objects displayed may not be clear, and the rearview camera needs to be cleaned.
Situations where the camera may not work normally
- Drive in a storm or fog.
- The camera surface is frozen or stained with dirt, dust, snow.
WARNING
- Due to the different visual differences of each person, the movement of vehicles and the different shapes of obstacles, the distance visually observed on the display screen may be different from the actual distance.
- Keep the camera clean and ensure that it is not covered with mud, frost or snow.