Before driving, check four tyres, and regularly check whether there are bulges, scratches, abnormal wear, cracks, nails and other phenomena on the tread and sidewall. If the above phenomenon occurs, please contact Authorised dealers for inspection and replacement.

Some tyre damages are not easy to be found. If abnormal vibration, noise or deviation of the vehicle is found during driving, there may be a tyre failure. At this time, stop immediately and check whether the wheels and tyres are damaged while ensuring safety. Contact Authorised dealers for tyre inspection if necessary.

Common causes of Tyre damage:

• Impact or rubbing against the road edge;
• Drive quickly through the deep pit on the road;
• Tyre pressure is too low or too high.

Regularly check the tread pattern depth and tread condition of the whole tyre width. If the tread depth is too low, the tyre adhesion will be reduced. Especially on slippery roads, it will increase the risk of water slip and seriously affect driving safety.

According to the tyre side wear mark ①, find the tyre safety limit mark. When the tread is worn to the wear mark, the tyre should be replaced.

Check that all wheels are fitted with valve caps, and check the valves for dirt and air leakage. Do not install any components on the valve.

Check the condition of the wheel rim. If the wheel rim is twisted, deformed, cracked, corroded, or severely scratched, it should be replaced in a timely manner. If the wheel bolts are often loose, replace the wheels and wheel bolts.