Check that the brake pedal is operating properly, making sure that there is a proper clearance under the brake pedal when it is fully pressed, and that the floor mat does not interfere with the operation of the brake pedal.

Check whether the accelerator pedal is operating normally, and ensure that the accelerator pedal is not blocked and uneven. It is necessary to ensure that there is a suitable gap from the accelerator pedal beyond the contact switch to the floor, and to ensure that the floor mat does not hinder the operation of the accelerator pedal.

Check if the steering wheel has excessive free travel, heavy steering, or other abnormal noises.

Check that all parts of the seat belt system (e.g. buckle latch and retractor) work properly and smoothly and are securely installed. Check whether the seat belt is cracked, scratched, worn or damaged.

Ensure that all warning lights, indicator lights and buzzers work properly.

When operating the A/C system, check if the air can be blown out from the defogging vents appropriately and sufficiently.

Check if the wiper and washer work properly and make sure that the wiper blade will not leave scratches after scraping, otherwise replace the wiper blade in time.

Ensure that the brake fluid level in the brake fluid reservoir is between MAX and MIN marking lines.

Check that there is sufficient washer fluid in the windshield washer fluid reservoir.

After the vehicle has stopped for a period of time, check if there is any leakage of gearbox oil or other liquids underneath the vehicle.

It is normal to drip water after using the air conditioner. If any leakage is noticed, please check the cause and repair it immediately.