- Wash the vehicle frequently and wax it to keep it clean.
- Always check for minor paint damage and repair it as soon as possible.
- Check vehicle underside for accumulation of sand, dirt, or salt. If found, wash clean with water as soon as possible.
Antifreeze and snow-melting agents used on road surfaces are corrosive and can accelerate the corrosion and ageing of vehicle components such as handbrake control lever cables, brake pipelines, floor panels, and fenders. Therefore, after driving on such surfaces, the underside of the vehicle should be cleaned promptly. For additional anti-rust and anti-corrosion measures, please consult Authorised dealers.
- It is forbidden to wash the passenger compartment directly with water to remove dirt, sand or other debris, but to remove dirt with a vacuum cleaner or broom.
- Do not allow water or other liquids to come into contact with electrical components inside the car, as it may damage them.
- Wet dirt or debris accumulates in the body panel cavity or other areas.
- Damage to paint or other protective layers caused by sand and small stones or small traffic accidents.
The accumulated gravel, dirt, and moisture in the lower part of the vehicle can accelerate the corrosion of the body. Wet carpets are not easy to completely dry in the car. In order to avoid floor corrosion, they should be taken out and dried.
Corrosion is accelerated in areas of high relative humidity.
Increased temperatures can accelerate corrosion of parts in poorly ventilated conditions, especially in those areas where temperatures are consistently above freezing.
Industrial pollution, the presence of salt in the air of coastal areas, or the use of salt in large quantities on highways can accelerate corrosion. Road salt can also accelerate the peeling of paintwork.