Mechanical Key & Replace the Key Battery

Mechanical Key

Take Out the Mechanical Key

First, move and hold the lock button ① in the direction Ⓐ indicated by the arrow, then gently pull out the mechanical key ② from the key fob in the direction Ⓑ as shown in the diagram.

Reinstall the Mechanical Key

Insert the mechanical key into key fob until the locking button returns to locked position.

Replace the Key Battery

The key fob battery typically lasts up to two years under normal use. If the remote control's range is significantly reduced or stops functioning, replace the battery promptly.

Please contact Authorised dealers to replace key battery or operate under the guidance of a professional to avoid damage.

If replacing it by yourself, prepare a CR2032 battery and the necessary tools.

CAUTION
  • Use a CR2032 battery or an equivalent replacement. Contact Authorised dealers for assistance or follow the provided instructions for safe battery replacement.
  • Be careful not to let children swallow batteries or removed parts.
  • Improper disposal of waste batteries will endanger the environment. Please dispose of waste batteries according to relevant laws and regulations.
  • Be careful not to touch the internal circuit board and electronic connectors, otherwise it may cause malfunctions.
  • Do not use metal tweezers to clamp the positive and negative terminals of the battery to avoid serious consumption of battery power.
♻️

Environmental Protection: Batteries contain pollutants. It's illegal to dispose of them with household waste. They must be recycled separately in an eco-friendly way.

Please dispose of the battery in an eco-friendly way. Send the depleted battery to Authorised dealers or a dedicated waste battery recycling point.

Open the Key Fob Battery Cover
  • Take out the mechanical key;
  • Gently separate the battery cover from the opening.
Replace the Key Fob Battery
  • Push out the battery from Ⓐ;
  • Replace with a new battery: CR2032 or equivalent;
  • Ensure that the positive and negative poles of the battery are correctly installed, and completely load the battery into the battery mounting slot;
  • Secure the battery cover ①;
  • Insert the mechanical key back into key fob;
  • Operate buttons to check the function.